Cisco CCNA (640-802) FAQ
Re. steve-cisco-exam-review.org

The prestigious Cisco CCNA certification is going to become even more prestigious later this year - and from all accounts, even more difficult! The current 640-801 exam will be phased out on November 6, giving candidates plenty of time to prepare for that exam. The new 640-802 exam is actually being introduced August 1, giving CCNA candidates an option as to which exam to take.

Now,IT certification exam expert really recommended the cisco exam below:
Cisco 642-446: Implementing Cisco Unified Communications IP Telephony Part 1, these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your successful Cisco Certification.
Cisco 642-456: Implementing Cisco Unified Communications Manager Part 2 (CIPT2 v6.0), these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your success

Naturally, CCNA candidates have a lot of questions regarding these changes. I’ve prepared this FAQ to answer the most common questions arriving in my email inbox. If your question isn’t answered here, send it to me and your question just might be in the next FAQ!

Q: Should I stop studying for the 640-801 exam?

A: Absolutely not. Actually, this should help you accelerate your efforts! Cisco has been kind enough to keep the current exam around through November 6, so you have more than enough time to pass the current version. Also, while I’m sure there will be some 640-802 study tools available soon, you won’t have a wide selection until later this year. Never delay your career progress or your studies - hit those books and pass the 640-801!

On a personal note, I’ve taken Cisco certification exams for almost a decade as well as taking exams from other vendors for about 14 years, and I’ve never been big on taking a brand-new exam. Some people like to do so, though- it’s all a matter of personal preference.

Q: What’s this I hear about another Cisco certification being offered?

A: Cisco no longer views the CCNA as an entry-level exam, and I think that’s a fantastic change. I have personally taught and written CCNA materials for several years, and I have never considered the CCNA to be entry-level. When you’re troubleshooting OSPF virtual links, you are not working at entry level!

Cisco does recognize the need for an entry-level certification, and that’s why they’ve developed the CCENT (Cisco Certified Entry Networking Technician) certification. I’ll have more details on that in a future article, but earning the CCENT is not required to become a CCNA.

Q: Is there still going to be a one-exam path and a two-exam path to the CCNA?

A: Yes, and again, I expect it to be more difficult to earn either way. If you choose the two-exam path, you’re actually going to take two ICND exams - ICND 1 (640-822) and ICND 2 (640-816). The INTRO exam for the current CCNA path will be phased out on November 6, along with the current ICND and CCNA exams. If you choose the two-exam path, passing the ICND 1 exam will make you a CCENT.

Q: Which topics will be dropped when the 640-801 exam is dropped?

A: Following the trend of other Cisco exams, the 640-802 exams will not test on ISDN. That’s the only major topic I see so far that will be dropped. This exam isn’t getting any easier!

Q: Which topics will be added?

A: A *lot* of them. According to Cisco’s CCNA exam blueprint, you can expect to see questions on Voice over IP, wireless, Rapid Spanning Tree Protocol (RSTP), SSH, and wireless security. This is an educated guess, but I’d expect to see even more on router and switch security as well.

Judging from that list, I expect the 640-802 CCNA exam to be even more challenging than the current version. Like I said, you have plenty of time to pass the current version!

Don’t see your question answered here? Send your CCNA question to chris@thebryantadvantage.com, and you just may see it answered in the next CCNA certification FAQ!

About the Author:
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage (http://www.thebryantadvantage.com), home of free Cisco CCNA certification and CCNP tutorials! Earn your Microsoft Vista Certification with The Bryant Advantage

640-553 CCNA Security Certification Exam IINS
Re. steve-cisco-exam-review.org

640-553 CCNA Security Certification Exam IINS meets the needs of IT professionals who are responsible for network security. It confirms an individual’s skills for job roles such as Network Security Specialists, Security Administrators, and Network Security Support Engineers. This certification validates skills including installation, troubleshooting and monitoring of network devices to maintain integrity, confidentiality and availability of data and devices and develops competency in the technologies that Cisco uses in its security structure

The CCNA Security is valid for three years. To recertify, Pass any current CCNA concentration exam (wireless, security, voice) OR pass a current 642 professional exam, OR pass the current CCIE written exam or the current CCDE written exam.

To you,IT certification exam expert really recommended the cisco exam below:
Cisco 646-230: Advanced Unified Communications AM, these are some exam study guides which you will cover every field and category in CSE helping to ready you for your successful Cisco Certification.
Cisco 642-456: Implementing Cisco Unified Communications Manager Part 2 (CIPT2 v6.0), these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your success

CCNA Lab 1 Change Router Name and Password
Re. steve-cisco-exam-review.org

Lab Requirements:
1. Router name: router
2. Set password to cisco, sercret to cisco, and vty to cisco.
3 All the passwords are required to be encrypted.

Now,IT certification exam expert really recommended the cisco exam below:
Cisco 646-230: Advanced Unified Communications AM, these are some exam study guides which you will cover every field and category in CSE helping to ready you for your successful Cisco Certification.
Cisco 642-446: Implementing Cisco Unified Communications IP Telephony Part 1, these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your success

Lab Process:
Router>enable
Router#configure terminal
Router(config)#hostname router set route name
Router(config)#enable password cisco set router password
Router(config)#enable secret cisco set router encryption password
Router(config)#line vty 0
Router(config-line)#login
Router(config-line)#password cisco require password authentication
Router(config-line)#exit
Router(config)#service password-encryption set global password encryption

CCNA Lab 2 Set Router Port Address/Label and Save Settings
Re. steve-cisco-exam-review.org

Lab Requirements:
1. On the router port, set the IP address to 202.119.249.219 and mask to 255.255.255.0.
2. Set the router prompt message to welcome to router CCNAlab.
3 Set the router port prompt message to this is a serial port.
4. Save the settings.

To you,IT certification exam expert really recommended the cisco exam below:
Cisco 642-446: Implementing Cisco Unified Communications IP Telephony Part 1, these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your successful Cisco Certification.
Cisco 642-456: Implementing Cisco Unified Communications Manager Part 2 (CIPT2 v6.0), these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your success

Lab Process:
Router>enable
Router#configure terminal
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 202.119.249.219 255.255.255.0 set the IP address of fast Ethernet port fao/o
Router(config-if)#no shutdown activate the interface
Router(config-if)#exit
Router(config)#banner motd @ set the login greeting
Enter TEXT message. End with the character ‘@’.
welcome to router CCNAlab @
Router(config)#interface serial 0
Router(config-if)#description this is a serial port set port description
Router(config-if)#end
Router#copy running-config startup-config save the settings
Destination filename [startup-config]?
Building configuration…
[OK]
Router#

Sun SCJP 1.5 Exam Became More Difficult
Re. exam-test-blog.org

To test the candidate on knowledge of declarations, access control, object orientation, assignments, operators, flow control, assertions, Sun made a new version for SCJP exam recently.

The new version, SCJP 1.5 exam, made the exam more difficult than the previous versions, it added more objectives and new questions to the actual questions and promote the passing score to 59%. However, the candidate need not to worry too much, no matter how the exam changed, it should be a designation that indicates excellent knowledge of the Java spec; as it always does. To compare the changes from the following guideline we list for you, and master all the knowledge, it will be easy for the candidate to pass the exam:

How is the SCJP 1.4 exam different from the SCJP 1.2?

* Exam objectives: AWT and IO have been dropped. Assertions and Wrapper classes have been added. A deeper understanding of the Collections Framework is required (e.g., using hashCode and equals).
* Number of questions: 61
* Time: 120 minutes (same as 1.2 exam)
* Passing score: 52% (reduced from 61%)
* Level of difficulty: Sun indicates that it is more difficult.
* Format of questions: As on the 1.2 exam, most questions (an estimated 80-90%) still have code samples 6-30 lines long. Multiple choice questions may have more than 4 options, but you will always be told how many options to choose.

How is the SCJP 1.5 exam different from the SCJP 1.4?

* Exam objectives: Several important new language features have been added, including enums, generics, static imports, and autoboxing/unboxing. API features added to the exam include java.lang.StringBuilder, java.util.Locale, java.util.Formater, java.util.Scanner. java.util.regex.Pattern, and java.util.regex.Matcher. Java IO features have been added, including File, BufferedReader, BufferedWriter, FileReader, FileWriter and PrintWriter. Concepts such as loose coupling and high cohesion have been added, as well as greater emphasis on encapsulation as it relates to JavaBean conventions. Bit manipulation (e.g., shifting) has been dropped.
* Number of questions: 72 (increased from 61)
* Time: 175 minutes (increased from 120 minutes)
* Passing score: 59% (increased from 52%)
* Level of difficulty: The concensus is that it is more difficult.
* Format of questions: As before, you will always be told how many options to choose. No credit is given for partial answers.

Will there be an exam for version 1.6?

Sun has made no official announcements regarding an SCJP exam for version 1.6, so no one really knows. (Note that there was no SCJP exam for 1.3.)

Now,the recommended cisco exam by IT certification exam expert are:
Cisco 350-020: CCIE SP Optical Qualification Exam, these are some exam study guides which you will cover every field and category in CCIE helping to ready you for your successful Cisco Certification.
Cisco 642-446: Implementing Cisco Unified Communications IP Telephony Part 1, these are some exam study guides which you will cover every field and category in CCVP helping to ready you for your success

Sun SCJP certification exams: 310-055 310-025 310-035 310-056 310-036